Omnitronic DSS-2 Manual Del Usuario página 24

Via the Scratch-wheel, you can temporarily adjust the playback-speed by ±16 %.
Pause-mode:
In the pause-mode, the current frame is repeated as soon as you turn the Scratch-wheel.
Via the Scratch-wheel, you can slowly search within a title forwards and backwards. In this way, you can
easily find a Cue-point for example.Turn the Scratch-wheel to the right in order to search forwards and turn it
to the right in order to search backwards. The faster you turn the Scratch-wheel the higher the searching-
speed. Please refer to 6.8 Cueing.
16. OPEN-BUTTON
Press this button to open the Disc compartment-door. The door opens.
17. BOP-BUTTON
When calling the Cue-point via the Bop-button the player remains in the play-mode.14. PITCHFADER
You can adjust the desired speed with the Pitchfader after pressing the Pitch-button. The display shows the
current percentage. If the Pitch-button is not pressed, any adjustment on the Pitchfader will have no effect.
18. CUE-BUTTON
Pause-mode:
In the pause-mode, you can cue by pressing and holding the Cue-button. As soon as you let the Cue-button
loose, the player returns to the track-start or the Cue-point.
Playback-mode:
If you press the Cue-button during playback, the player returns to the track-start or the Cue-point and goes
into Pause-mode.
Please refer to the explanations under 6.8 Cueing.
19. PLAY/PAUSE-BUTTON
With the Play/Pause-button, you can start the playback and stop it again. Please refer to the explanations
under 6.4 Play/Pause.
20. BPM-BUTTON
Via the BPM-button, you can switch the display from beats per minute (BPM) to speed-adjustment in %.
Via the BPM-button, you can display the beats per minute of a track. Press the button in the rhythm of the
music. The display shows the current beats per minute (BPM).
24/64 10553155_V_1_0.DOC