Technical Data Technical Data; Recommended Abrasive And Diamond Cutting Blade, Specification - Husqvarna K6500 II Manual De Instrucciones

Technical data
Technical data
Motor
Electric motor
3-phase operation, Motor output - max. kW
1-phase operation, Motor output - max. kW
Weight
Machine without blade and cable package, kg/lbs
Spindle, output shaft
Max spindle speed, rpm
Max. peripheral speed, m/s / ft/min
Water cooling
Water cooling of electric motor
Water cooling of blade
Recommended water pressure, bar/PSI
Min. recommended water flow, l/min
Connecting nipple
Noise emissions (see note 1)
Sound power level, measured dB(A)
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
Equivalent vibration levels, a
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
for noise power level has an uncertainty of 3 dB(A).
Note 2: Noise pressure level according to EN 60745-1. Reported data for noise pressure level has an uncertainty of 3
dB(A).
Note 3: Equivalent vibration level, according to EN 60745-2-22, is calculated as the time-weighted energy total for
vibration levels. Reported data for vibration levels has an uncertainty of 1,5 m/s
Recommended abrasive and diamond cutting blade, specification
Cutting blade Max cutting
diameter, inch/ depth, mm/
mm inch
16" (400 mm) 155/6
24 – English
TECHNICAL DATA
K6500 II
HF High Frequency
5,5
3
9,8 / 21.6
4300
90/18000
Yes
Yes
0,5-8 / 7-116
0,5 at water temperature 15°C
Type "Gardena"
104
93
(see note 3)
hveq
1,8
1,6
Blade speed
rating, rpm
4775
) conforming to EN 60745-1. Reported data
WA
2
Blade speed Blade center
rating, m/s / ft/ hole diameter,
min mm/inch
100/19600 25,4/1
.
Max blade
thickness, mm/inch
5/0,2