Ideal 61-415 TightSight Manual Del Usuario página 19

Operation
Note: Long Press: > 2 seconds Short Press: < 2 seconds
Short Press: Circularly enter or exit the data hold mode,
LCD will display " "
1) Short press: Circularly select the appropriate test function.
2) When in HOLD, RANGE, MAX/MIN, REL / ZERO function, Short press the SEL key will exit
current function and go into the relative select function.
3) Long press: Circularly turn on or off the backlight and flashlight, default is off, Applicable to
all measuring settings. The backlight and flashlight will turn off automatically 5 minutes after
they are activated. Long press SEL button again to turn on the backlight and flashlight.
1) Short press the RANGE key to enter manual range mode (LCD will not display "AUTO"),
and the current range, press again to enter cyclical selection range. Long press: exits manual
range and enters Auto range. Switching measurement setting or restarting the unit returns
the unit to the default setting.
2) In HOLD, MAX/MIN, REL / ZERO function, Short press the RANGE key to exit the current
function and enter the relative range function.
1) Short press: enter "MAX/MIN" statistics mode, continuously updates the data, and you
can circularly view the maximum value→ minimum value→ maximum value. Long press:
exits statistical mode and returns to the normal working mode. After pressing the REL/ZERO,
and then short pressing MAX/MIN, the unit will show the MAX/MIN after deducting the initial
offset value.
2) When HOLD function is in use, MAX/MIN is invalid.
3) After entering the statistical mode, exit the automatic range at the same time and enter
into the current range, the APO will be disabled; exit the MAX/MIN function to restore the
automatic range and automatic shutdown.
4) In the statistical mode, a short press of the HOLD key will stop refreshing the statistical
data. At the same time, a short press of the MAX/MIN key can review the stored data of MAX/
MIN, a short press of the HOLD key exits HOLD to continue refreshing the statistical data.
1) Short press: Circularly enter or exit REL function (when entering REL function, LCD will
display " " symbol )
2) Entering the REL function, exits auto range and enters into the current range.
3) Entering the REL measurement mode does not change the actual measurable range of the
current range
4) When HOLD or MAX/MIN is in use, REL function is invalid.
1) Short press: Circularly enter or exits the ZERO clearing function (when entering the ZERO
function, the LCD will display the "ZERO" symbol)
2) Pressing ZERO does not affect the current automatic or manual range status. Pressing
ZERO and then pressing MAX/MIN will exit the automatic range and enter the current range.
3) When HOLD or MAX/MIN is in use, the ZERO function is invalid.
Displays "EF" - Electromagnetic Field
19