Greencut PP650X Manual De Instrucciones página 52

52
All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Authorised Service Centre.
The following information on hazards and precautions includes the most probable situations that may arise during the use
of this machine.
Check all the documentation, packaging and product labels before using it. If you encounter a situation not described in
this manual use common sense to use the machine as safely as possible and, if you see any danger, do not use the machine.
USERS
• This product has been designed to be handled by users of legal age who have read and understood these instructions.
Do not allow underage persons or persons who do not understand these instructions to use the product.
• Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety
devices and how they should be used.
• If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the
company of an experienced person.
PERSONAL SAFETY
• Do not force this machine. Use this machine, accessories, tools, etc. in accordance with these instructions taking
into account the conditions and work to be performed. Using this machine for other than its intended purpose
may cause a hazardous situation.
• Be alert, watch what you are doing when operating this machine.
• Do not use this machine when you are tired or under the influence of drugs, alcohol, or medication.
• Avoid inhalation of exhaust gases. This machine produces dangerous gases such as carbon monoxide that can
cause dizziness, fainting or death.
• Check that all safety features are installed and in good condition. Do not use this machine if any of its components
are damaged.
• Always maintain proper foot support and operate the machine only when it is on a fixed, stable, level surface.
Sliding or unstable surfaces can cause a loss of balance or control of the machine.
• Always hold the machine by the handles with both hands. We recommend the use of a harness.
• Never place your fingers or any other part of your body near the cutting accessories of the machine.
• When starting up the machine, the cutting tool must not touch any objects or the ground.
• Do not touch any of the engine components while the machine is running or just after it has stopped due to the
high temperatures it reaches.
• Do not operate the machine in rainy or extremely humid conditions.
• Do not leave this machine unattended during operation.
WORK CLOTHES
• Dress appropriately. Do not wear loose clothing or jewelry that may get caught in moving parts. We recommend
the use of: Eye protection (safety goggles), hearing protection, head, face, hand (resistant, non-slip gloves) and
foot (non-slip shoes) protection.
WORK AREA SAFETY
• Do not use the machine at extreme temperatures and keep it away from excessive moisture.
• Do not use this machine in explosive atmospheres in the presence of flammable liquids, gases and dust.
• Never start the machine in a closed room or enclosure. Exhaust gases and fuel vapors contain carbon monoxide
and hazardous chemicals.