Metra 108-FD6CH Instrucciones De Instalación página 5

To the 108-FD6CH radio trim panel:
7. Attach the engine start/stop switch
panel, and then the rubber button
membrane. (Figure G)
8. Secure the engine start/stop circuit
board and cover to the switch/cover
assembly using (6) #4 x 1/2" Phillips
screws provided. (Figure H)
KIT PREPARATION
(Figure G)
(Figure H)
(CONT.)
9. Insert the USB cable into the USB slot,
through the rear. (Figure I)
10. Attach (4) panel clips provided.
(Figure J)
Continue to Kit Assembly
(Figure I)
(Figure J)
REV. 9/25/2019 INST108-FD6CH
5