Metra 108-FD6CH Instrucciones De Instalación página 7

INTERFACE FEATURES
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains the factory backup camera
• Retains balance
• Micro-B USB updatable
INTERFACE COMPONENTS
• Axxess interface (built into the touchscreen display)
• Main harness
• HVAC interface
• HVAC interface harness
• 16-pin harness with stripped leads
• 54-pin backup camera harness
• 4-pin harness with yellow RCA jacks
TABLE OF CONTENTS
Connections ...............................................................................................................................8-9
Installation .................................................................................................................................. 10
Programming ...............................................................................................................................11
Touchscreen display operation ..............................................................................................12-13
Steering wheel control settings ............................................................................................14-15
Troubleshooting .......................................................................................................................... 15
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter• Zip ties
REV. 9/25/2019 INST108-FD6CH
7