Drill Safety Warnings; Functional Description - Makita DS4010 Manual De Instrucciones

Ocultar thumbs Ver también para DS4010:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DRILL SAFETY WARNINGS

1.
Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
2.
Hold
power
surfaces, when performing an operation
where the cutting accessory
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
3.
Always be sure you have a firm footing.
Be sure no one is below when using the tool
in high locations.
4.
Hold the tool firmly.
5.
Keep hands away from rotating parts.
6.
Do not leave the tool running. Operate the tool
only when hand-held.
7.
Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
8.
Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
Symbols
The followings show the symbols used for tool.
volts
amperes
hertz
alternating current
no load speed
Class II Construction
revolutions or reciprocation per minute
tool
by
insulated
may contact
GEB001-6

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
gripping
unplugged before adjusting or checking function
on the tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
For Model DS4010
1
2
011309
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger, push in
the lock button and then release the switch trigger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For Models DS4011 and DS5000
CAUTION:
Change the direction of rotation only when the tool
comes to a complete stop. Changing it before the
USD201-2
tool stops may damage the tool.
2
011310
The switch is reversible, providing either clockwise or
counterclockwise rotation. To start the tool, simply pull
the lower part of the switch trigger for clockwise or the
upper part for counterclockwise. Release the switch
trigger to stop.
4
1
3
1. Switch trigger
2. Lock button
1. Counterclockwise
2. Switch trigger
3. Clockwise

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ds4011Ds5000

Tabla de contenido