Extraordinary Maintenance; End Of Service Life; Replacement Parts; Anomalies - Causes - Solutions - Gentilin CS 240/03 Manual De Instruccions

Rev. 00 - 12/2013 - Cod. CM31710 -
All activities carried out to ensure use and operation of the appliance, via various intervention types (regulation, valve
checks, cleaning of air filters, etc.) executed by the Manufacturer's technicians according to preestablished time intervals
and in the instance of faults or wear and tear.
in tHE inStanCE oF EXtRaoRDinaRY MaintEnanCE, tECHniCal aSSiSStanCE PRoViDED BY tHE Ma-
nUFaCtURER oR tHE aUtHoRiSED SUPPliER MUSt BE REQUEStED.
When disposing of the appliance, current legislation in force must be considered.
Dispose of the various component materials separately (plastic, copper, iron, etc.).
in tHE inStanCE oF EXtRaoRDinaRY MaintEnanCE, tECHniCal aSSiSStanCE PRoViDED BY tHE Ma-
nUFaCtURER oR tHE aUtHoRiSED SUPPliER MUSt BE REQUEStED.
USinG UnoRiGinal REPlaCEMEnt PaRtS iS FoRBiDDEn.
The following table displays various scenarios which may occur when using the appliance.
aUtHoRiSED oPERatoRS MUSt onlY CaRRY oUt oPERationS FoR WHiCH tHEY aRE QUaliFiED (SEE
PaRaGRaPH 6) anD WitH tHE ConSEnt oF tHE SaFEtY ManaGER (WHERE tHE aPPlianCE iS USED in a
BUSinESS ContEXt).
ABNORMALITIES
The appliance will not
start or it stops and will
not re-start.
20
Instruction manual Compressor Mod. CS240

32. ExTRAORDINARY MAINTENANCE

33. END OF SERVICE LIFE

34. REPLACEMENT PARTS

35. ANOMALIES - CAUSES - SOLUTIONS

CAUSE
No electrical supply.
Intervention of thermal
reset owing to voltage over-
load and/or a short-circuit.
SOLUTION
• Check that the "ON-OFF" switch (3) is in the "ON (I)" position.
• Check that the electrical plug (8) is functioning correctly and
is correctly plugged in.
• Check that any extensions used and the plug are functioning
correctly.
• Check that the electrical main switch is functioning and in
the "ON" position.
• Carry out the procedure described in Paragraph 28.
3
8