Advanced Bionics Naída CI Q70 Guía De Usuario página 6

while stimulating the implant. Doing so could cause the implant and sound
processor to lose lock. If this happens, power down the processor and power back
on (by disengaging the battery and reattaching).
The digitally-coded, inductive transmission technology used in this device is
•
extremely reliable and experiences virtually no interference from other devices.
It should be noted, however, that when operating the device near a computer
terminal or other strong electromagnetic fields, it may be necessary to be at least
24" (60 cm) away to ensure proper operation. If the Naída CI Q70 does not respond
to the implant device because of an unusual field disturbance, move away from
the disturbing field.
If the AB myPilot stops being able to transmit commands to the sound processor,
•
it may be necessary to re-pair the AB myPilot with your sound processor. Consult the
Pairing to the AB myPilot section of this user manual.
If volume commands from your AB myPilot to your sound processor seem erratic,
•
re-pair the AB myPilot and the Naída CI Q70.
When streaming audio with the ComPilot, if your headpiece becomes
NOTE:
•
unlocked, turn off the ComPilot prior to re-locking your headpiece. Not doing so
may prevent the sound processor from communicating with your implant.
Patients are advised that the use of WindBlock, EchoBlock and/or SoundRelax
•
may affect the quality of sound.
Electrostatic Discharge (ESD)
High levels of static electricity may damage electronic components of your sound processor or
implant. Care should be taken to avoid exposure of the system to static electricity. ESD is present
when you feel a spark jump from your body or your hair
stands on-end.
The following are examples of situations where high levels of electrostatic charge may be created:
Walking, crawling, or sliding on carpets.
•
Sliding on plastic slides.
•
Exiting an automobile.
•
Pulling sweaters on and off.
•
Touching TV or computer screens.
•
Removing bedding materials.
•
Naída CI Q70 Sound Processor User Guide
5