Isotronic Diamant Instrucciones De Uso página 10

Instructions for Use
"Diamond" Solar Animal Repellent
High quality electronic components combined with solar technology –
for an environmentally friendly repelling of Rodents, ants and snakes
Article No. 70045
Dear Client,
Congratulations for choosing one of our quality products. Please follow these
instructions carefully and keep them with you.
Solar Animal Repellent through vibrations – no chemicals, no ground
pollution!
1. Product description
This animal repeller device is one of the new generation of repellers! It generates
quartz vibrations in approx. 60 sec intervals within a frequency range of 400-1000
Hz ± 50 Hz. Outdoor test showed that these specially generated vibrations have
an optimum effective area of approx. 1000 m², depending on condition of soil.
Because the tone frequencies and vibrations are intolerable for many soil
animals, they migrate to other areas within just a few days. Other useful animals
are not harmed. The Solar Animal Repeller can be used in the garden, in the
field or in other outdoor areas with unwanted rodents. The finely tuned electronic
components and the efficient solar modules guarantee constant function even
with poor light. This appliance not only repels rodents, ants and snakes!
2. Installation and maintenance
PLEASE MAKE ABSOLUTELY SURE THAT THE BATTERY IS FULLY
CHARGED BEFORE USING THE DEVICE FOR THE FIRST TIME. WITH THE
DEVICE TURNED OFF, PLACE IT INTO THE GROUND FOR ABOUT 12
HOURS IN THE SUN BEFORE USE.
Insert the device into the ground, so that up to ¾ of the aluminium stake is
beneath the surface. Remove the plastic foil in the transparent part of head of
the product before using (battery is on power now, see also 3. Replacement
of the rechargeable battery). To start up, select the operating mode on the
underside of the housing. The animal repellent device is now ready for operation.
Check the function of the device regularly. In case it does not work normally any
more, a replacement of the rechargeable battery might be necessary (
see point 3).
Operating modes
1: [On] Tone frequency
2: [On] Vibration motor
3: [On] Tone frequency + vibration motor (Parallel operating mode)
4: [On] Tone frequency + vibration motor (Alternate operating mode)
5: Switch off the device