Yamaha RX-V485 Guía De Inicio Rápida página 13

6
Connecting the power cable to an AC wall outlet,
and turning on the unit
Warning
Before connecting the power cable
(Taiwan, Brazil, and Central and South
America models only)
Set the switch position of VOLTAGE
SELECTOR according to your local voltage.
Voltages are AC 110–120/220–240 V,
50/60 Hz.
1
Plug the power cable into an
AC wall outlet.
To an AC wall
outlet
VOLTAGE SELECTOR
110V-
120V
220V-
240V
VOLTAGE SELECTOR
2
Press z (receiver power) to
turn on the unit.
ZONEA ZONE A ZONE B ZONE B
z
SLEEP SLEEP
SCENE SCENE
BD BD
TV TV NET NET RADIO RADIO
DVD DVD
STRAIGHT STRAIGHT DIRECT DIRECT ENHANCER ENHANCER BASS BASS
PROGRAM PROGRAM
3
Turn on the TV and switch the
TV input to display video from
the unit (HDMI OUT jack).
The Network Setup screen shown below will be
displayed on the TV when the unit is turned on for
the first time after purchase. It may take several
tens of seconds for the screen to be displayed
(WAC: Wireless Accessory Configuration).
Network Setup WAC
You can share the network's
wireless (Wi-Fi) setting with
this device using a device
with iOS7 or later.
↓ NEXT
To perform network setup using
another method, press ENTER.
CANCEL
RETURN
Language <English>
See "Setting up a wireless connection using an
iOS device" under "Connecting to a network
wirelessly" in the Owner's Manual when using
this function to connect the unit to a network.
This document explains wireless connection
using the Music Cast CONTROLLER app
installed on your mobile device. Follow the
procedure described under "8 Setting MusicCast"
(p. 16).
Note
This screen will not be displayed if the unit is connected
to a router via its NETWORK jack (wired connection).
13
En