Manual cooking without using the programmer
To use manually the oven, that is, without the auxiliary
programmer, it is necessary to cancel the
pushing the
.
If the «A» message is displayed in permanent mode, indicating
that the oven is programmed, it is impossible to set the timer to
manual function and therefore the oven cannot be switched on. In
this case the program must be firstly cancelled by pressing
then the manual function can be set.
Timer
The timer can be used to measure a time period between 1 minute
and 23 hours & 59 minutes.
1) Automatic cooking (start and end)
Set the length of cooking time by pushing the
Set the end of cooking time by pushing the
Set temperature and cooking program by using the thermostat
knob and the selector knob.
After this setting the symbol «A» will light.
An example : cooking lasts 45 minutes and is expected to stop at 14.00.
Push
until having set 0.45.
Push
until having set 14.00.
After having finished the setting, the clock hour will appear on
the panel and «A» symbol will light. This means the cooking
program has been memorized.
At 13.15 h. (14.00 h. minus 45 minutes ) the oven turns on
automatically.
At 14.00 h. the oven turns off automatically, a buzzer goes on
until it is stopped by pushing the
The symbol «A» will flash.
button.
flashing
button.
button.
button.
«A»
by
,
31