Shure KSE1500 Guia Del Usuario página 5

Setup
Step 1: Connect the earphones to the amplifier
Plug into the amplifier with the amplifier powered off.
Note: Align the earphone cable connector with the red dot towards the front
of the amplifier.
Step 2: Connect a sound source to the amplifier.
Set the INPUT switch to LINE for analog 3.5 mm sources or USB for
digital sources.
3.5 mm input (analog audio)
Plug the audio device into the LINE IN input and set the INPUT
switch to LINE.
To charge the battery while using an analog source, connect the
amplifier to a computer or external battery
LINE IN
Connecting to an Analog Source
LINE IN
MENU
USB (digital audio and power)
Use the USB cable when listening to music from a computer or
other USB-equipped device and set the INPUT switch to USB.
When connected to a computer, USB simultaneously streams
digital audio and charges the amplifier battery.
Note: You have the option to disable automatic charging in the Utilities
menu.
LINE USB
INPUT
Connecting to a USB Source
Step 3: Power on the amplifier
The driver automatically installs when the amplifier is first plugged into
a device. The KSE1500 should take over as the default audio device.
Note: Volume controls are disabled on Windows, Mac, and iOS. Volume
should be adjusted only by using the amp volume knob for best performance.
Ensure that volume is maximized in iTunes or the Windows Media Player.
Firmware
Firmware is embedded software in each component that controls
functionality. Periodically, new versions of firmware are developed to
incorporate additional features and enhancements. To take advantage
of design improvements, new versions of the firmware can be
downloaded and installed using the Shure Update Utility tool. Software
is available for download from http://www.shure.com/americas/
products/software/utilities/shure-update-utility.
3