Technical Service - Campbell Hausfeld PA210000 Manual De Instrucciones De Operación Y Lista De Partes

Figure 2 - detail showing location of flow
direction arrow
4. Install the unit with the same pipe
size as the piping in use. Avoid using
unnecessary fittings, couplings, etc.,
that restrict airflow. Use PTFE tape on
all threads.
5. Connect the air supply to the inlet
port.
Operation
Before pressurizing system, make certain
the bowl is securely locked in place by
pushing it into the filter body and turning
clockwise to lock.
installed.
Flow
direction
arrow
Do not use filter
without bowl guard
www.campbellhausfeld.com
Maintenance
Release all pressure before
attempting to install, service,
relocate or perform any
maintenance on the air system. Personal
injury and/or property damage could
occur.
removing the bowl. Personal injury and/
or property damage could occur. If bowl
is difficult to remove, it may be under
pressure.
1. Inspect and replace cracked,
damaged or deteriorated seals. Wipe
bowls with a soft, dry cloth to clean.
If bowl is damaged, unit must be
replaced.
2. Replace or clean filter element
periodically. Remove the filter element
and tap filter on a hard surface or use
an air gun to blow out residual dirt.
3. Drain bowls at least once per work
shift. Pressure should be regulated
down to 30 psi max before drain is
opened. To avoid spray or splatter,
cover bottom of filter with a cloth and
push in the manual drain.
4. Before placing the unit in service,
make sure the bowl is reinstalled and
securely locked in place.

technIcal seRvIce

For information regarding the operation or
repair of this product, please call 1-855-
504-5678.
PA210000
Always depressurize
the unit before
3