Charging The Battery - Wiko Darkmoon Guía Rápida

The holder on the right in the same slot is for instal-
ling a MicrosD memory card (up to 32GB). Insert the
sD card gently as shown in the diagram.
~

Charging the Battery

A flashing red light indicates that the battery level is
very low : the battery should be recharged because,
if the level is too low, it may shorten the life of the
battery.
Connect the charger to a power outlet and the micro
UsB connector to the phone's UsB port.
The phone's status indicator changes to red, indicating
that the device is charging.
Once the phone has finished charging, the status in-
dicator changes to green and you should unplug the
charger.
WARNING : The phone battery cannot be removed. Do
not try to open the phone.
For more information, refer to the Safety Informa-
tion section.