smartheart 51-1490 Manual De Instrucciones página 23

MEMORY FUNCTION
Clearing Measurements From Memory
To delete a all results in a given bank:
1. When the monitor is off, press and release the
M button to access the memory bank feature.
2. Press and hold the S button; the display will
flash dEL and ALL, Fig 1.
3. Press the S button again to confirm you would
like to delete the memory bank, Fig 2; the
display will show dONE and turn off.
Note: To exit out of delete mode without
deleting any records, press START•STOP
button before pressing S button to confirm any
delete commands.
Fig. 1
Fig. 2
ENGLISH • 23