Body Release; Carpet/Bare Floor Selector - Panasonic MC-UL910 Instrucciones De Operación

Body Release

Carpet/Bare Floor Selector

Carpet/Bare
Floor Selector
Sélecteur
tapis/plancher
Control para
alfombra/
sin alfombra
- 28 -
➢ ➢ Your vacuum cleaner is equipped
with three (3) position body release;
• Upright position (locked)
• Middle position (normal use)
• Low position (under furniture)
➢ ➢ Release the body by pressing down
on the body release pedal with your
foot and pulling back and down on
the handle with your hand.
➢ ➢ Move the vacuum cleaner to upright
position for storage and tool use.
CAUTION
DO NOT press the handle quick release
button when the vacuum cleaner is in
use.
➢ ➢ Selector should be placed in BARE
FLOOR (TOOLS) position when using
vacuum cleaner on bare floors and
when using tools. The agitator does
not rotate in the BARE FLOOR
(TOOLS) position.
➢ ➢ Selector should be placed in CARPET
position when using vacuum cleaner
on carpeted floors.
NOTE: For longer belt life, turn vacuum
cleaner off before moving selector.
➢ ➢ Otherwise, take care when selecting
either position to ensure selector is
pushed as fully and quickly as
possible to desired position.
➢ ➢ Failure to do so can cause belt to rub
on selector shaft and result in belt
becoming hot and creating a burning
rubber smell.