Alliance Laundry Systems SF135PV Manual De Instrucciones página 23

Display
STOP Stop button pressed or cycle ended
S1 Supply #1 (Detergent)
S2 Supply #2 (Bleach)
S3 Supply #3 (Sour)
S4 Supply #4 (Softener)
S5 Supply #5 (Starch/Sizing)
TH Controlled temperature fill to high level
TM Controlled temperature fill to medium level
TL Controlled temperature fill to low level
TO Controlled temperature overflow
WH Warm fill to high level
WM Warm fill to medium level
WL Warm fill to low level
WO Warm fill to overflow level
W1 Wash 1 (regular reversing)
W2 Wash 2 (gentle reversing)
W3 Wash 3 (no agitation)
W4 Wash 4 (medium reversing action)
W5 Wash 5 (temp.-controlled cool-down)
W6 Wash 6 (extra low agitation)
W7 Wash 7 (no agitation, drain 1 open, no refill)
• Left dot – poor balance condition
• Second dot from left – door lock switch
• Third dot from left – Program Mode
• Fourth dot from left – high level reached
• Fifth dot from left – medium level reached
• Right dot – low level reached
F232101
Table 1 (Continued)
Display Interpretations
Meaning
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Display
WE-6 Prompts
°FAR Temperature in degrees Fahrenheit
°CEN Temperature in degrees Centigrade
1DRAIN One drain capability selected. (This means
that a second independent drain controlled by
Auxiliarry 2 output is disabled.)
2DRAIN Second independent drain enabled (via
Auxiliary 2 output – precludes control of
recirculation pump via Auxiliary 2, if
selected). This should not be confused with
the "dual drain" option.
ADV Advance (skip steps) feature enabled
NO ADV Advance feature disabled
MANUAL Manual Mode enabled
NO MAN Manual Mode disabled
WET CL
Wet clean function for Auxiliary 1 output
(1/2 wash speed) and Auxiliary 2 output
(recirculation pump) enabled. (Refer to
"2DRAIN".)
NO WCL Wet clean function for Auxiliary 1 and 2
disabled (Auxiliary 1 and 2 are timed
outputs).
BAL SW Balance sensor
BAL 1 Balance routine for 1305 inverter drive
BAL 2 Balance routine for 1336 inverter drive for
135-pound capacity
BAL 3 Balance routine for 1336 inverter drive for
250-pound capacity
Operation
Meaning
21