salmson Nexis-VE 2 Instalación Y Instrucciones De Puesta En Marcha página 55

Parameterisation of menu <2.0.0.0> and <5.0.0.0>
In „SERVICE" mode, menu parameters <2.0.0.0> and <5.0.0.0> can be adjusted.
The following two setting modes exist:
• „Easy Mode": provides quick access to the 3 operating modes.
• „Expert Mode": provides access to all existing parameters.
• Set switch 1 to the ON position (Fig. A1, Pos. 1).
• „SERVICE" mode is activated.
This symbol flashes on the status page of the display (Fig. A7).
Fig. A7
SERVICE
ON
1 2
OPERATION
ON
1 2
Easy Mode
• Press the rotary knob within 2 seconds. The symbol „Easy Mode" appears (Fig. A7).
• Press the rotary knob to confirm the selection. The display changes to menu <2.0.0.0>.
„Easy Mode" facilitates the quick setting of the 3 operating modes (Fig. A8)
• Speed control"
• „Constant pressure"/"Variable pressure"
• „P.I.D. control"
• After setting, set switch 1 to the OFF position (Fig. A1, Pos. 1).
Expert Mode
• Press the rotary knob within 2 seconds. Go to Expert mode, the symbol „Expert Mode" appears
(Fig. A7).
• Press the rotary knob to confirm the selection. The display changes to menu <2.0.0.0>.
First, select the operating mode in menu <2.0.0.0>.
• „Speed control"
• „Constant pressure"/"Variable pressure"
• „P.I.D. control"
Then, in menu <5.0.0.0>, the Expert mode provides access to all converter parameters (Fig. A9).
• After setting, set switch 1 to the OFF position (Fig. A1, Pos. 1).
SALMSON 12/2013
Easy Mode
Expert Mode
ON
S
1
Control type
Easy Mode
Setpoint
Control type
Expert Mode
Pump
Information
Service
English
55