diversey TASKI procarpet 30 Manual De Instrucciones página 69

Filling the fresh water tank
Attention:
Max. permissible water temperature
60 °C/140 °F.
Diversey recommends using cold water,
as hot water will adjust to the ground tem-
perature as soon as it comes into contact
with the ground. Thus there are no advan-
tages to using hot water.
Dosing
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Caution:
Using unsuitable products (e.g. products
containing chlorine, acids or solvents) may
cause harm to health and severe damage
to the machine.
Adjusting brush height
Attention:
The position of the brush must be adjusted
to the carpet pile.
Incorrect setting may damage the carpet.
• 1 = low-pile carpet, low brush position
• 4 = deep-pile carpet, high brush position
max.60°C
max.140°F
1
Control panel
I: Water, brush and cleaning agent (encapsulation)
(white brush)
0: Brush only (rubbing into carpet)
II: Water, brush and suction motor (spray extraction)
(black brush)
Prepare carpet
Notice:
Vacuum the carpet before working with the
carpet cleaning machine.
For visible stains, treat the carpet with a
TASKI stain remover. Please contact your
Diversey service partner for help.
Application technique
Machine
Intermediate cleaning (encapsulation)
Base cleaning (spray extraction)
Wet shampooing
Shampoo dry
Cleaning methods
Notice:
The cleaning method is described in detail
in the "Methods Card".
Please contact your TASKI customer con-
sultant for further details.
EN
Yes
Yes
no
no
67