Additional Safety Information
Electric shock
Do not touch the unit with wet hands. Doing so may
cause electric shock or damage the unit.
Protruding location
Do not install the display unit in protruding
locations. If you install the unit in the following
locations, it may result in injury.
• Do not install the unit in a location where the unit
protrudes, such as on or behind pillar.
• Do not install the unit in a location where you
might bump your head on it.
Placement
Never place the set in hot,
humid or excessively dusty
places. Do not install the set
where it may be exposed to
mechanical vibrations.
Accessories
Secure the display unit properly.
If the display unit is not secured properly, it may fall
and cause injury. Take measures to prevent this by
using a stand or other apparatus on the floor or wall
in the specified manner, referring to the operating
instructions supplied with your stand.
Weight
Do not stand on the media receiver
unit. The unit may fall or be broken,
causing injury. Pay special attention
when little children are likely to
come near the set.
10
Safety Information
Broken glass
Do not throw anything at
the unit. The screen glass
may explode by the impact
and cause serious injury.
Oils
Do not install this unit in restaurants that use
oil. Dust absorbing oil may enter into the unit
and damage the unit.
Corrosion
If you use this set near the seashore, salt may
corrode metal parts of the unit and cause
internal damage or fire. It may also shorten the
life of the unit. Steps should be taken to reduce
the humidity and temperature of the area
where the set is located.
Recommended place for
the media receiver unit
Place the media receiver
unit on a stable, level
surface. Otherwise, the
media receiver unit may fall
and cause injury. Use an optional Sony stand,
which has adequate strength.
Cleaning
Unplug the mains lead when cleaning this unit.
If not, it may result in electric shock.
(continued)