Sony Wega KE-42MR1 Manual De Instrucciones página 42

Clock Display
•The clock display turns off automatically 5 minutes after it is turned on.
•The clock display also turns on or off by pressing
On/Off Timer
42
Menu System
The "Clock Display" option allows you to display the clock on the
screen.
To do this:
1 After selecting the option, press
2 Press or to select On and then press OK.
The "On/Off Timer" option allows you to turn the TV on and off
automatically at a specified time automatically. To use this
function, set the clock in advance (page 41).
• If you change the following settings, Off is selected
automatically in the Timer option. In this case, select On in
the Timer option.
– Unplugging the mains lead of the media receiver unit
– On Time, Holding Time, Weekly Setting, Repeat,
Programme option settings
• Whilst the "All White" function in the "Screen Saver"
option (page 35) is activated (set to "On"), the off timer
functions are suspended and the TV does not switch into
the standby mode automatically at a specified time. After
the "All White" function finishes, the off timer functions
are resumed, and the TV automatically enters the standby
mode.
To do this:
1 After selecting the option, press
2 Highlight Timer and press
.
3 Press or to select On Time, then press
4 Set the time for the TV to turn on itself automatically. Press
or to set the hour, then press
the minutes, then press
5 Press to select Holding Time, then press
or
6 Press to select the desired Holding Time. Select the
or
holding time (max. of 5 hours) for the TV to switch itself
automatically into the standby mode.
7 Press
or to select Weekly Setting, then press
8 Press
or to select the day of the week you wish to set for
On/Off Timer, then press
9 Press
or to select On, then press
10 Repeat steps 8 and 9 to set any other days of a week.
11 Press to select Programme, then press
or
12 Press or to select the channels (TV Broadcast) that you
want to watch at the time of turning on the TV, then press
To turn the TV on and off at a specified time everyday, set
Repeat to On after step 2, then go to step 3.
To cancel this function afterwards, select Off instead of On in step 2
above.
.
on the remote.
.
or to select On, then press
. Next press
.
.
.
.
or to set
.
.
.
.
(continued)