Mounting The Bar And Chain - Stihl HT 73 Manual De Instrucciones. Manual Del Usuario

A
4
Flush-cutting thick branches
If branch diameter is more than
4" (10 cm), first perform undercut (3)
and cross-cut at a distance (A) of about
8" (20 cm) from the final cut. Then carry
out the flush-cut (4), starting with a
relieving cut and finishing with a cross-
cut.
HT 73

Mounting the Bar and Chain

:
Unscrew nut and take off cover.
3
:
Turn tensioning screw (1)
counterclockwise until the
:
tensioning nut (2) butts against the
left end of the housing slot.
1
2
:
english / USA
The chain is very sharp – wear work
gloves to protect hands from cuts.
Fit the chain –
start at the bar nose.
15