STEP 2 – PASO 2 - ETAPE 2 - FASE 2 - STEP 2 – STAP 2:
Raise the computer panel while check the signal connection, and insert 2pcs M8×20 screws with washers to fasten it.
STEP 3 – PASO 3 - ETAPE 3 - FASE 3 - STEP 3 – STAP 3:
Use 2pcs ST4X16 screws to fasten the plastic cover at bottom of stand pipe.
STEP 4 – PASO 4 - ETAPE 4 - FASE 4 - STEP 4 – STAP 4:
Put on the safety, turn on the power switch, then can start machine.
FYTTER |WWW.FYTTER.COM
PAG- 17