Remote Control - Sulion BOMBAY PARTY Manual De Instrucciones

Remote control

Turn on / Turn off fan
Natural wind (Speed cycle 1-6
progressive)
3 3
4 4
1 Speed 1
2 2 Speed 2
5 5 2
Speed 3
3
6 6
1 1
4 Speed 4
5 Speed 5
6 Speed 6
Change sense of rotation
Turn on light
1H 4H 8H
Turn off fan
Self-temperature sensor
26ºC Speed= 6
26ºC 19ºC Speed= 3
<19ºC Speed=1
1H Timer 1h
4H Timer 4h
8H Timer 8h
Syncing the receiver and the remote control for fan operation
If the receiver and transmitter of this fan are properly synchronized, the fan will work. During synchronization the receiver
recognizes the signal from the transmitter, this is called the learning process.
Make sure the fan is disconnected. This is essential for the synchronization process.
Unless the synchronization process has been successful, the fan will work partially or will not work. By default, all fans have
been preconfigured at the factory and should be functional once the installation is completed and the fan is turned on.
If the remote control does not work after installation or during use, synchronization can be performed as indicated below. Note
in any case that there could be other reasons why your fan or remote control does not work:
Make sure all connections are correctly made.
Make sure that the remote control contains batteries.
12
Make sure that all switches (main and isolation) are on.
Instructions for synchronizing the receiver and the remote control
The control of this fan does not require synchronization with the recelver, the control is already factory-linked with its receiver;
Universal mode and Unit mode:
- Unit Mode:
This type of synchronization allows you to control two or more nearby fans independently, each with its remote control.
Synchronization:
The control of this fan does not require synchronization with the receiver, the control is already factory-linked with its receiver
- Universal Mode:
This type of synchronization allows you to control one or more nearby fans with the same remote control.
Synchronization:
1.-Connect the power (wall switch) of the fan or fans that you want to control, and then just within the following
15 seconds, press the key of the remote control for 5 continuous seconds.
2.-A "beep" sound indicates that the connection has been executed and the equipment can function normally.
3.-Now, transmitter and receiver of the fan / s will have been synchronized. Turn off the fan / s current using the
switch or automatic and then turn it back on / s, this step is the one that closes the synchronization process.
It is not possible for a controller to forget a fan once it has been linked, if you want a fan to leave
to obey a command, another one must be linked to "overwrite it".
CIF A28763647 +34 916774540 Calle Verano, 51 - Polígono Industrial Las Monjas -28850 Torrejón de Ardoz - Madrid (ESPAÑA)
App
Thanks to Sulion BOMBAY PARTY fan you can select the kind of lighting you prefer for each momento (warm, cold, specific
color...) also music played with your device (pone, laptop, Tablet...) will sound through the speaker of the fan.
Instalation:
1. Turn on the light of the fan
2. Activate the Bluetooth from your device (phone, laptop or Tablet).
3. Search the device "Sulion BOMBAY PARTY Fan" in the list of available devices for pairing
4. Download the iLink APP from Google Play or Apple Store
5. When oppening the APP select Configuration (1) and open Bluetooth connection (2), in the new screen search for "Sulion BOMBAY
PARTY Fan" (3) for adding it in the APP.
6. Once the previous step is finished you can control the fan completely from the device, there is no need to repeat steps 3,4 and 5
(1)
App Functions:
• Lamp: Allows to turn ON and OFF the light of the fan, also can change the light into RGB colors.
• Color temperature: Allows to change and control different tones of white light.
• Music: Allows to play any song stored in the device. Once the fan is paired, the music can also be played from other APPs
and from internet browser.
• Scene: Allows to change among different preselcted scenes.
Note: If you want to play music from the device or with an APP, light mustn't be switched off from the remote controller,
it should be turned off from the APP.
Remote control safety functions
Blocking protection
The remote receiver includes a function that automatically blocks motor operation, cutting current to the motor 30 seconds
after detecting an obstruction in front of the fan that prevents normal operation. When this happens, you must remove the
obstacles blocking the fan. Then, press the off button on the remote control to reset the receiver. Now you can continue to
use the fan normally.
Note: Unless you remove the obstruction blocking the fan, it will not operate correctly.
Overload prtection
If the fan's receiver detects that the motor is operating at greater than 80W (this indicates an overload), current to the motor
will be cut automatically, which will immediately stop the fan. To reset the receiver, press the off button on the remote control.
Note: If the receiver goes into protection mode again, this may indicate a motor defect. Contact the supplier immediately. The
duration of the warranty is indicated in the warranty document provided in this manual.
ATC: 916749481 - info@sulion.es / SAT : 916749483 - sat@sulion.es
(2) (3)
13
www.sulion.es