JVC KD-AR780 Manual De Instrucciones página 14

• When appears on the display, you can move
back to the previous display by pressing number
button 3.
Registering using "Open"
Preparation
Operate the device to turn on its Bluetooth function.
1
Select "Bluetooth Phone" or "Bluetooth
Audio."
2
Select "New."
3
Enter setting menu.
4
Select "Open."
5
Enter a PIN (Personal Identification
Number) code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
• To enter a PIN code less than 4-digit, press
number button 5 (
PIN code.
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
1
Move to the next (or previous) number
position.
14
) to delete the initial
2
Select a number.
3 1
Repeat steps
entering a PIN code.
4
Confirm the entry.
"Open..." flashes on the display.
6
Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same
PIN code you have just entered for this unit.
"Connected (and device name)" appears on the
display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use "Connect" (or activate
"Auto Connect") to connect the same device from
next time. (See pages 15 and 36.)
Searching for available devices
Perform steps 1 – 3 on the left column, then...
1
Select "Search."
The unit searches and displays the list of the
available devices.
• If no available device is detected, "Device not
found" appears.
2
Select a device you want to connect.
2
and until you finish