Securing The Unit - Sony Bravia KLV-40ZX1M Manual De Instrucciones

• When moving the unit from a cold area to a
warm area, a sudden room temperature change
may cause the unit's picture to blur or show
poor color due to moisture condensation.
Should this occur, please wait a few hours to
allow the moisture to evaporate before
powering on the unit.

Securing the Unit

Sony strongly recommends taking
measures to prevent the Unit from toppling
over. Unsecured Unit may topple and
result in property damage, serious bodily
injury or even death.
Prevent the Unit from Toppling Over
s Secure the Unit to a wall and/or stand.
s Do not allow children to play or climb on
furniture and Unit sets.
s Avoid placing or hanging items on the Unit.
s Never install the Unit on:
• slippery, unstable and/or uneven surfaces.
• furniture that can easily be used as steps,
such as a chest of drawers.
s Install the Unit where it cannot be pulled,
pushed, or knocked over.
s Route all AC power cords and connecting
cables so that they are not accessible to
curious children.
Use a Sony TV stand
Use a Sony specified TV stand (see page 2) and
follow the instruction manual provided with the
Sony TV stand.
If a Sony specified TV stand is not used, consider
the following recommended measures.
Recommended Measures to Secure the
Unit
Secure the Stand for the Unit
Make sure the TV stand can adequately support
the weight of the Unit. Use two angle braces (not
supplied) to secure the stand.
For each angle brace use the appropriate hardware
to:
• attach one side of the angle brace to the wall stud.
• attach the other side to the TV stand.
8
US
Secure the Unit to the Stand
Use the Stand Support adapter (supplied) and rope
or chain.
1
Remove the screw from the Table-Top Stand.
2
Secure the Stand Support adapter to the Table-
Top Stand, then attach the rope or chain to the
adapter.
3
Secure the rope or chain to the TV stand (not
supplied). Make sure that there is no excess
slack in the rope or chain.
2
Screw
Rope or chain
Stand Support
adapter
Angle brace
Stand
1
Screw
3
Screw