Location Requirements - Haier ESA405P Guía De Uso Y Cuidado

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and ordinances. Check the location where the air
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
• A grounded electrical outlet within 6 ft. (183 cm) of where the power supply cord exits the air
conditioner, for models: ESA405P, ESA406P, ESA406N, ESA408N
• A grounded electrical outlet within 4 ft. (122 cm) of where the power supply cord exits the air
conditioner, for models: ESA410N, ESA412N
NOTE: Do not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
• Free movement of air in the room to be cooled.
• A large enough window opening for the air conditioner. (See Fig.2)
• The air conditioner must not be installed in a through-the-wall sleeve or in a wall. It can only be
installed in a double-hung window.
NOTE: The outside cabinet louvers and air discharge must not be obstructed by bushes, trees,
etc. Air must be able to pass freely through the cabinet louvers. (See Fig.1)
Fig. 1
CABINET LOUVERS
WINDOW INSTALLATION
Window opening measurements:
ESA405P
A. Width 21-7/8" - 36"
B. Height
PAGE 6
WIDTH
ESA406P, ESA406N
24-1/2" - 36"
13-3/8"
INSTALLATION REQUIREMENTS
ESA408N / ESA410N
25" - 36-21/32"
13-3/8"
Fig. 2
AIR DISCHARGE
B-HEIGHT
WIDTH
26-1/8" - 37-25/32"
14-9/16"
A-WIDTH
ESA412N
14-9/16"