Stadiametric Rangefinder - Pulsar HELION Manual De Instrucciones

Photo mode. Photography
Switch to the Photo mode with a long press of the
Take a picture with a short press of the REC button. The image
freezes for 0.5 sec and a photo is saved to the internal memory.
in the top left corner of the display you can see: photography icon
">100" means that you can take more than 100 pictures. If the number
of available pictures is less than 100, actual amount of available
pictures (for example 98) is shown next to the icon
Notes:
- you can enter and operate the menu during video recording;
- recorded videos and photos are saved to the built-in memory card in
the format img_xxx.jpg (photos); video_xxx.avi (videos). xxx –
three-digit counter for videos and photos;
- counter for multimedia files cannot be reset;
Attention!
- Maximum duration of a recorded file is seven minutes. After
this time expires a video is recorded into a new file. The number
of recorded files is limited by the capacity of unit's internal
memory.
- regularly check the free capacity of the internal memory, move
recorded footage to other storage media to free up space on the
internal memory card.
IMPORTANT!
To playback video files recorded by thermal imaging devices on iOS-
based computers, we recommend that you use VLC video player or
Elmedia player.
Download links and QR codes are shown below:
VLC VIDEO PLAYER
http://www.videolan.org/
vlc/download-macosx.html
15
WI-FI FUNCTION
Your thermal imager features wireless connection option (Wi-Fi) which
links it with external appliances (smartphone, tablet PC).
19
REC button.
.
ELMEDIA VIDEO PLAYER
https://itunes.apple.com/us/
app/elmedia-multiformat-video/
id937759555?mt=12
Turn on the wireless module with a long press of the UP (10) button.
Wi-Fi operation is shown in the status bar as follows:
Connection status
, Wi-Fi is off
Wi-Fi activated by the user,
Wi-Fi in the device is being
activated
Wi-Fi is on, no connection with
device
Wi-Fi is on, device connected
Your device is detected by an external device as HELION_XXXX»,
where XXXX – is the last four digits of device's serial number».
After a password is generated on an external appliance (please refer
to the menu option "Wi-Fi setup" of the section "Main menu
functions" of this user manual) and connection is established, the
icon in the status bar changes to
16

STADIAMETRIC RANGEFINDER

Thermal imagers are equipped with a stadiametric rangefinder which
allows the user to estimate approximate distance to an object of known
size.
Select the "Stadiametric rangefinder" function with a short press of
the M (9) button and select icon
You will see on the display: measurement bars, icons of three
reference objects and respective distances for the three objects.
There are three pre-set reference
objects:
- Hare – height 0.3 m
- Wild boar – height 0.7 m
- Deer – height 1.7 m
Status bar indication
icon
icon
icon
icon
.
.
160m
66m
28m
20