Ice Maker And Storage Bin - Sears Kenmore 106.5004 Serie Manual De Uso Y Cuidado

ICE MAKER AND STORAGE BIN

Allow 24 hours to produce the first batch of ice. Discard the
■
first three batches of ice produced.
The quality of your ice will be only as good as the quality of
■
the water supplied to your ice maker. Avoid connecting the ice
maker to a softened water supply. Water softener chemicals
(such as salt) can damage parts of the ice maker and lead to
poor quality ice. If a softened water supply cannot be avoided,
make sure the water softener is operating properly and is well
maintained.
Do not use anything sharp to break up the ice in the storage
■
bin. This can cause damage to the ice container and the
dispenser mechanism.
Do not store anything on top of or in the ice maker or
■
storage bin.
Turning the Ice Maker On/Off
Style 1
To turn on the ice maker, lift open the ice maker door and lower
■
the wire shutoff arm to the On (down) position.
To manually turn off the ice maker, lift the wire shutoff arm to
■
the Off (arm up) position and listen for the click. Ice can still be
dispensed, but no more can be made.
NOTE: Your ice maker has an automatic shutoff. As ice is made,
the ice cubes will fill the ice storage bin, and the ice cubes will
raise the wire shutoff arm to the Off (arm up) position. Do not
force the wire shutoff arm up or down.
Removing and Replacing the Ice Storage Bin
1. Lift and hold open the ice maker door.
2. Lift the wire shutoff arm so it clicks
into the Off (up) position. Release the
ice maker door.
3. Lift up the front of the storage bin and
pull it out.
4. Replace the bin by pushing it in all the
way, or the dispenser will not work.
5. To restart ice production, lift open
the ice maker door and push the wire
shutoff arm down to the On position.
16
Style 2
The On/Off switch is located on the bottom of the Ice Maker and
can be accessed by lifting and opening the ice maker door.
To turn on the ice maker, lift open the ice maker door switch to
■
the On (right) position.
To manually turn off the ice maker, lift open the ice maker
■
switch to the Off (left) position. Ice can still be dispensed, but
no more can be made.
NOTE: Your ice maker has an automatic shutoff to keep the
storage bin from overfilling during normal operation. As ice is
made, the ice cubes will fill the ice storage bin, and the ice cubes
will raise the shutoff arm to the Off (arm up) position. When the
storage bin is at full capacity, the ice maker will automatically
stop ice production, but the ice maker On/Off switch will remain
in the On (down) position.
Removing and Replacing the Ice Storage Bin
1. Pull the covering panel up from the bottom.
2. Lift the plastic shutoff arm so it clicks into the Off (up) position.
3. Lift up the front of the storage bin and pull it out.
4. Replace the bin by pushing it in all the way or the dispenser
will not work.
5. To restart ice production, lower the plastic shutoff arm into the
On (down) position. Make sure the door is closed tightly.