Target Color; General Menu - Sony ExwaveHad DXC-990 Instrucciones De Uso

TARGET COLOR

Select when adjusting DETAIL or LINEAR
MATRIX for a specific color.
This item is displayed only when you set
either DETAIL or LINEAR MATRIX to
TARGET.
ALL
Adjusts DETAIL or LINEAR MATRIX for
the whole image. Normally, set to this
position.
IN
Adjusts DETAIL or LINEAR MATRIX for
a specific color.
RANGE
Finely adjusts the area in the range from –10
to +10.
To specify a color
1 Press the ENTER button.
2 Move the cross cursor (
the center of the screen to the desired
color with the B, b, V or v button so that
the cross cursor square covers the desired
color, then press the ENTER button.
You can adjust the color indicated by the
cross cursor ( ).
OUT
Adjusts DETAIL or LINEAR MATRIX for
colors other than a specified color.
RANGE
Finely adjusts the area in the range from –10
to +10.
When you select OUT, then set the color
with the procedure in "To specify a color,"
you can adjust DETAIL or LINEAR
MATRIX for colors other than that indicated
by the cross cursor (
GB 18

GENERAL Menu

) appearing in
).
GENERAL Menu
The GENERAL menu is used to set the
general items.
<GENERAL>
>CCD MODE
SHADING COMP.
TRIGGER
NEGA
FLICKER CANCELLER
Select
MENU
CCD MODE
Selects the CCD read-out mode.
FIELD
Accumulates charges in field units.
Use to shoot a moving object.
FRAME
Accumulates charges in frame units.
Provides the image with the highest possible
vertical resolution. Use to shoot a still
object.
SHADING COMP. (Shading
Compensation)
Eliminates green or magenta color which
may appear at the top or bottom of the
screen, when the camera is used with an
optical instrument.
OFF
Color elimination does not function.
ON
If green or magenta color appears at the top
or bottom of the screen when the camera is
attached to a microscope, etc., select this
setting.
[A]
FIELD
OFF
OFF
OFF
OFF
Back