Sony ExwaveHad DXC-990 Instrucciones De Uso página 28

Connections
To supply power to the camera, use the
CMA-D2/D2MD/D2CE/D2MDCE/D3/
D3CE camera adaptor (not supplied).
The camera adaptor you can use with your
camera varies with the signal systems and
uses.
System
EIA
standard,
NTSC
color
Use
system
Medical
CMA-
D2MD
Non-medical CMA-D2
CMA-D3
Note
Be sure to turn off the power supply for all
equipment before making any connection.
Using the CMA-D2/D2MD/D2CE/
D2MDCE camera adaptor
There are two methods for connecting the
camera and the camera adaptor.
Using the CCDC cable
This connection only supplies power to the
camera.
For connecting method, see "Connecting
using the CCDC cable (for supplying power
only)" on page 29.
Using the CCMC cable
This connection supplies power to the
camera and transmits video signals to the
camera adaptor.
For connecting method, see "Connecting
using the CCMC cable (for supplying power
to camera and video signals to the camera
adapter)" on page 29.
GB 28
Connections
Note
Be sure to use one camera adaptor for each
DXC-990/990P unit.
Although the CMA-D2/D2MD/D2CE/
D2MDCE camera adaptor has two
CAMERA connectors (4-pin and 12-pin),
the power consumption of the camera is such
that two camera units cannot be connected at
the same time.
Using the CMA-D3/D3CE camera
adaptor
CCIR
standard,
The connections using the CMA-D3/D3CE
PAL color
camera adaptor supply power to the camera
system
and transmit video signals to the camera
adaptor.
CMA-
For connecting method, see "Connecting to
D2MDCE
the CMA-D3/D3CE Camera Adaptor" on
CMA-
page 32.
D2CE
CMA-
D3CE