ROTOR RMB Manual De Instrucciones página 21

CH-3661 Uetendorf
Sound enclousure mounting
- Switch off appliance with main switch («OFF» (0)).
- Push together both hinge bushings and hook the
back board in.
Release the hinge bushings and align the back board until
click into place of both hinge bushings.
- Hook in the sound enclousure onto the steel bar.
Push together both hinge bushings only a little and
release them again for clicking into place as soon as
back board and sound enclousure are aligned.
Mix
- Add ingredients to be mixed in the container.
- Place the lid on firmly.
- Place the mixing bowl on the rubber ring so that the
switching rod to the bowl monitor is pressed and the blender
attachment is properly and securely fixed.
- Close sound enclousure.
- Switch on motor (main switch "ON" (1)) and
vary the speed according to the ingredients
being mixed (selection switch).
- Turn off: at the main switch («OFF» (0)).
- Open sound enclousure.
- Remove the container from the motor base.
The function of "pulse" permits the simple short stir up.
Never use the memory blender without Sound enclousure (2 parts)!
Only fit or remove container when motor is stationary.
The blender runs only when the sound enclousure is close. The
„SAVE"-Button flashes red, if the sound enclousure is open
Container removal
First remove the complete container from the motor
base and empty it totally.
Attention: To disengage the plastic threaded ring,
turn to the right. Clockwise, like closing
a water tap, as the threaded ring is left-threaded!
Do not tear the handle (risk of breakage).
Instruction Manual
Rotor Memory Blender
© Rotor Lips AG
.
OPEN
TURN
RING
19