KTM Power Parts 61012032000 Instrucciones Para El Montaje página 4

1
6 7 8
9
10 11
B 12
B 12
4
5
2
4
3
A
A
2
C
Scope of delivery:
1x brake disc lock(1)
1x protection bolt(2)
1x locking bolt(3)
2x keys (4)
1x carabiner (5)
2x spacers ø18x10.5x16.25 (RC8/R MJ 08-10) (6)
2x spacers ø18x10.5x17.2 (990SD/R MJ 05-10) (7)
2x spacers ø18x10.5x19.2 (990SM/T/R MJ 05-10) (8)
2x screws M10x1.25x80 (RC8/R MJ 08-10) (9)
2x screws M10x1.25x90 (990SD/R MJ 05-10) (10)
2x screws M10x1.25x85 (990SM/T/R MJ 05-10) (11)
- Remove the original screws (12) of the brake caliper.
- Position the shackle (1) (included), insert the spacers (A) (included) and
mount the shackle with the screws (B) (included).
NOTE:
Which spacers and screws are used depends on the particular vehicle.
(A) RC8/R MJ 08-10
990SD/R MJ 05-10
990SM/T/R MJ 05-10
(B) RC8/R MJ 08-10
990SD/R MJ 05-10
990SM/T/R MJ 05-10
Use
- Remove the protector (2) and insert the locking bolt (3).
- Push the motorcycle back and forth a small distance until the bolt enga-
ges in the brake disc.
- Lock and unlock the lock with the key at position (C).
NOTE
To be able to reorder a key, you must register your Roadlok.To do this, you
require the VIN of your motorcycle and the serial number of the key, which
is located on the tag on the key ring.
This can be performed at the customer service center under +43 (0) 800
802057 or at www.roadlok.com
International customer service: +43 (0) 800 802057
USA customer service: +1 (888) 762-3565
Spacer ø18x10.5x16.25 (6)
Spacer ø18x10.5x17.2 (7)
Spacer ø18x10.5x19.2 (8)
Screw M10x1.25x80 (9)
Screw M10x1.25x90 (10)
Screw M10x1.25x85 (11)