Publicidad
1
REMOVE THE HARDWARE.
Use a screwdriver to remove
the screws and washers
from the ends of the tubes.
1
PREPARE YOUR EXO SYSTEM.
NOTE: If you are installing EXO GearWarrior™ on the EXO TopShelf™ skip to step 2.
A. To extend the arms, first extend the driver-side arm by pulling the pin and
swinging it outward until the arm locks into place.
B. Then pull the pin for the passenger-side arm and extend it until it locks into place.
A
2
LOOSEN THE KNOBS.
First, push the pin next to the
knobs to the unlocked position.
Completely loosen the knobs by
turning them counter-clockwise
until they no longer turn.
Instruction #1036042A - page 2 of 6
ASSEMBLY
2
ASSEMBLE THE BASKET.
4X
4X
INSTALLATION
Unlocked
Déverrouillé • Desbloqueado
Insert the screws
with washers into
each of the holes
and tighten them.
CAUTION: Keep
your fingers
away from ALL
moving parts!
B
2X
Publicidad
