Publicidad
3
INSTALL THE CLEATS.
A. Tilt the the cleats slightly as you slide them along the
tracks of the arms until they can slide no further.
B. Lower the front of the cleats into the track.
C. Tighten both knobs completely and lock them with the key.
D. Then push the pin next to the knobs to locked position.
E. Verify installation by trying to lift up on the cleats.
5
ATTACH THE BRACKETS.
Unlocked
Déverrouillé • Desbloqueado
Instruction #1036042A - page 3 of 6
Locked
Verrouillé • Bloqueado
NOTE: You may need to unlock and loosen the knobs of the EXO system
so the holes in the cleats can perfectly align with the holes in the
brackets. Be sure to retighten and lock the knobs if this step is needed.
REMOVAL
A. Press the locking pins to unlock
the knobs.
B. Completely loosen the knobs by
turning them counter-clockwise
until they are fully open.
C. With the assistance of a friend
lift the EXO GearWarrior™ off
the EXO System.
4
PLACE THE BASKET.
Place the basket onto the
2X
• Orient the brackets as shown.
• Lower them onto the basket
• Use the wrench to fully
cleats as shown.
as shown and align the holes.
X Nm
tighten the bolts to 8 Nm.
IMPORTANT!
Be sure to read all
the warnings and
warranty information
contained in the
insert accompanying
these instructions!
4X
Publicidad
