Assembly Guide - Blackstone 1836 El Manual Del Propietario

Model 1836 | Owner's Manual |

Assembly Guide

!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you ASSEMBLY INSTRUCTIONS
should handle all compo-
Please read all instructions thoroughly before proceeding. Make sure all
nents with care to avoid
accidental injury. the plastic packing material is removed before assembling
Some parts may contain
Find a large, clean area to assemble your griddle. Please refer to the parts list
sharp edges, especially
and assembly diagrams as necessary.
as noted in these instruc-
tions. Wear protective Griddle assembly involves large components; therefore,
gloves if necessary. two people assemble the unit.
!
WA R N I N G
The use of alcohol, prescrip-
S T E P 0 1
tion or non-prescription
drugs may impair the
down on a smooth, flat surface with the help of another person.
consumer's ability to prop-
Pull the locking pin to release the legs and raise them to a vertical position.
erly assemble or safely
Attach the two (2) wheels to the legs as shown. Use an adjustable wrench to
operate the appliance.
tighten the wheels to the right leg assembly.
!
C A U T I O N
Two people are recom-
mended for the assembly
of this product.
08
it is advised to have
Remove the griddle body from the packaging and lay it upside
S T E P 0 2
Place the bottom shelf between the legs. On the caster side of
the body, place the propane tank support in place and use the M6x40 thumb
screw to attach the shelf and the support to the griddle body. Use the M6x60
thumb screw to attach the other side of the shelf to the griddle legs.
S T E P 0 3 With the help of another person
, place the griddle on its wheels.
Attach the propane tank hanger with the M6x38 screw, inserting it from the
outside of the unit as shown.
Assembly Guide | Owner's Manual | Model 1836
TOOLS NEEDED: Phillips Head
Screwdriver & Adjustable Wrench
09