Assembly Guide - Blackstone 1666 Manual Del Propietário

Model 1666 | Owner's Manual |

Assembly Guide

ASSEMBLY INSTRUCTIONS
!
WA R N I N G
Please read all instructions thoroughly before proceeding. Make sure all
The manufacturer has made every
the plastic packing material is removed before assembling
effort to eliminate any sharp
edges. However, you should
Find a large, clean area to assemble your griddle. Please refer to the parts list
handle all components with care
and assembly diagrams as necessary.
to avoid accidental injury.
Griddle assembly involves large components; therefore,
Some parts may contain sharp
two people assemble the unit.
edges, especially as noted
in these instructions. Wear
protective gloves if necessary.
S T E P 0 1
griddle feet to the bottom of the griddle in the pre-threaded holes. Ensure
!
WA R N I N G that the fuel nozzle is housed within the burner opening.
The use of alcohol, prescription
or non-prescription drugs may
impair the consumer's ability
to properly assemble or safely
operate the appliance.
!
C A U T I O N
Two people are recommended for
the assembly of this product.
06
it is advised to have
Place griddle on a smooth flat surface and attach the four (4)
S T E P 0 2
Set the griddle on its feet and ensure that the ignition needle is
set 3-7mm above the burner tube.
II
3-7mm
S T E P 0 3
Place the griddle top onto the griddle body by aligning the four
pins to the corresponding holes. Make sure the pins are fully seated in the
holes. Place the grease cup on the back of the griddle body in the center of
the unit.
Assembly Guide | Owner's Manual | Model 1666
07