Menu Options; Menu Selections; Recall Of Stored Data; Transmission Of Stored Data To A Pc - Aqualytic AL 255T IR Instrucciones

Menu options

GB
Mode
On
Off
!
Store Date
1 2
3 4
Time Cal
Mode
Store Date
diS
1
Time Cal
Mode
Read
Mode
!
Store Date
Prt
1
Time Cal
36

Menu selections

Press the [MODE] key and hold.
Switch the unit on using the [ON/OFF] key.
Allow the 3 decimal points to be displayed before releasing the
[MODE] key.
The [!] key allows for selection of the following menu points:
a) and b);
1
a) recall stored data ([!] press once) and
b) transfer to a PC ([!] press twice)
setting the date and time
3
2
user calibration
4
The selected menu is indicated by an arrow in the display.
Confirm the selection with the [MODE] key.
a) diS – Recall of stored data
1
The photometer shows 125 data sets in the following format (automati-
cally proceeds every 3 seconds until result is displayed):
Number n xx (xx: 16...1)
Year YYYY (i.e. 2014)
Date mm.dd (monthmonth:dayday)
Time hh:mm (hourhour:minuteminute)
Test Method
Result x,xx
The [READ] key repeats the current data set.
The [MODE] key scrolls through all stored data sets.
Quit the menu by pressing [!] key.
b) Transmission of stored data to a PC
1
From the TB 211 IR data can be transmitted to a PC. PC data
recording software (available on www.lovibond.com/en/
Wasseranalytik/Support-Service/Download-Center) enables receipt of
the data stored on the turbidity meter by a PC.
The data can be exported to an Excel
user as an evaluation tool in the accustomed manner. If Excel
available, the data can be saved as a .txt file and is then available for
later evaluation.
The data is transferred from the turbidity meter in .csv format.
Connect the turbidity meter to the PC with the USB cable included
in the scope of delivery.
Start the data recording software on the PC and activate the
connection to the turbidity meter.
sheet and used directly by the
®
AL 255T IR USB_3 02/2019
is not
®