Placing Calls - Yealink W53P Guia De Inicio Rapido

E
To delete a contact:
N
G
1. Press the OK key to enter the main menu, and then select Directory.
L
2. Press or
I
3. Press the Options soft key, and then select Delete to delete the selected entry.
S
H
To assign a speed dial number:
1. Press the OK key to enter the main menu, and then select Settings->Telephony->
Speed Dial.
2. Press or
3. Press or
If both the office number and mobile number are stored, press
the desired number, and then press the OK soft key again.
Basic Call Features

Placing Calls

To place a call directly:
1. Do one of the following:
• Enter the desired number when the handset is idle.
• Press to enter the pre-dialing screen. Enter the desired number using the keypad.
If there are multiple lines assigned to your handset as outgoing lines, press the Line
soft key to select the desired line. If you do not select a line, the handset uses the
default outgoing line to dial out.
2. Press ,
To place a call from the local directory:
1. Press when the handset is idle.
2. Highlight the desired entry, and then press
If multiple numbers for the contact are stored, press
number, and then press
To place a call from the call history:
1. Press the History soft key when the handset is idle, and then select the desired call
history list.
2. Press or
using the default line.
8
to highlight the desired entry.
to highlight the desired digit key, and then press the Assign soft key.
to highlight the desired entry, and then press the OK soft key.
or to dial out.
or
to highlight the desired entry, and then press
or
again to dial out using the default line.
or to highlight
to dial out using the default line.
or to highlight the desired
or to dial out