Tool Specifications - Bostitch SMART POINT BTFP71917 Manual De Operación Y De Mantenimiento

TOOL SPECIFICATIONS

All dimensions in inches unless otherwise specified.
Description
Engine Type
Operation Pressure Range
Maximum Operation Pressure
Fastener Type
Fastener Gauge
Fastener Range
Magazine Capacity
Length
Width
Height
Weight
Operating Pressure:
70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The BTFP71917 requires 2.0 cubic feet per minute or C.F.M. (56.6 liters per minute or LT/MIN) of free air at
80PSI (5.6 kg/cm ) to operate at a rate of 60 fasteners per minute. To determine the appropriately sized air
2
compressor, take the actual rate at which the tool will be run and compare the required C.F.M. (LT/MIN) to
the compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm
For example, if your fastener usage averages 30 fasteners per minute, you need 50% of the tools
C.F.M. required to operate the tool at the rate of 60 fasteners per minute. In this case, be sure that your
air compressor can deliver a minimum of 1.0 C.F.M. (28.3 LT/MIN) at 80 PSI(5.6 kg/cm
performance.
FASTENER SPECIFICATIONS
Tool Model
BTFP71917
* Stainless steel fasteners also available in certain sizes. Visit www.BOSTITCH.com for further details.
NOTE:
BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve
maximum perfomance when used with precision BOSTITICH fasteners engineered to the same exacting
standards. BOSTITCH cannot assume responsibility for product performance if our tools are used with
fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH
fasteners and accessories.
16 GA Finish Nailer
70-120 PSI (4.9 to 8.43kg/cm
120 PSI (8.43 kg/cm
1-1/4" to 2-1/2" (32mm - 63mm)
11-5/16" (288.5mm)
). Select the operating pressure within in this range for best fastener
2
Fastener Type
Fastener SKU
SB16-1.25
SB16-1.50
SB16-1.75
SB16-2.00
Straight
Finish Nails
SB16-2.50
BTFP71917
Oil-Free
)
2
SB16 Series
16 Gauge
100
12-1/2" (316.6mm)
3-1/3" (84.1mm)
3.9lbs (1.7kg)
Crown Width
-6-
)
2
).
2
Gauge
N/A 16
16
N/A
16
N/A
N/A 16
N/A 16
) for optimum
2
Length
1-1/4" (32mm)
1-1/2" (38mm)
1-3/4" (45mm)
2" (50mm)
2-1/2" (63mm)