Unpacking; Start-Up; Location Of Controls; Control Panel - Clatronic BBA 3365 Instrucciones De Servicio

• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to
danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a quali-
fied person and with a cable of the same type.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sen-
sory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are older 8 years and supervised.
• Keep the appliance and its cord out of reach of children less than 8 years.
• Do not operate the appliance with an external timer or similar remote system.
• Place the appliance on a level work surface. Ensure that mains cord and appliance are not placed on or in close
proximity of hot surfaces or heat sources. Run the mains cord away from sharp objects.
• Set up the appliance steady and slip-proof. The appliance can move when kneading heavy dough. Place the ap-
pliance on a rubber mat if the work surface is slippery.
• Do not move or lift the appliance during operation; first turn it off and disconnect from mains power supply. Always
carry the appliance in both hands!
• Do not remove the baking tin during operation!
• The operation of electric heating appliances creates high temperatures, which can cause burns (e.g. baking tin,
heating element).
WARNING: Risk of burning!
Only touch or remove hot components with oven gloves!
• Let the appliance cool down completely before cleaning ore storing.
• Use this appliance only to prepare foodstuffs, do not use for other purposes. We are not liable for damages due
to improper use or operation!

Unpacking

• Remove the appliance from the gift box.
• Remove all packaging materials, such as plastic foil, filling materials,
cable clips and cardboard.
• Check that all accessories are contained in the box.
• Clean the appliance as described in chapter "Cleaning".

Start-up

Electric Connection
• Confirm that your mains voltage matches the specifications on the
type label before connecting to mains power supply.
• Connect the appliance to a properly installed wall outlet.
A buzzer sounds and the display shows the basic setting (see "Control
Panel", "1. LCD Display").

Location of Controls

A Handle E Ventilation slots
B Lid, detachable F Casing
C Baking chamber G Kneading hook
D Control Panel H Baking tin
Accessories:
1 hook for removing the kneading hook (not illustrated),
a) Measuring cup
b) Measuring spoon
54

Control Panel

1 LCD Display
Shows information about desired program number, browning, bread
weight (marked with arrow) and baking time.
2 FARBE (color) button
to enter the program timer setting
3 ZEIT (Time) buttons
/
to enter the program timer setting
4 START/STOPP (Start/Stop) button
to start and end the program
5 TEIGMENGE (Quantity dough) button
to set the 2 weight levels, as described later
6 AUSWAHL (Select) button
to select the programs described in chapter "Program Sequence
Bread Maker".

Description Control Panel

1. LCD Display
BASIC SETTING
This displays standby mode. It corresponds with the basic program. The
display shows "1 3:20". The "1" stands for the selected program; "3:20"
stands for the program duration. The positions of two arrows show the
selected browning and the weight. The basic setting after turning the