Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
HOLD/Blacklight Button
To freeze the reading on the LCD display, momentarily press the HOLD
The "HOLD" indicator will be displayed while the reading is being held. Momentarily
press the HOLD
button again to exit HOLD and return to normal operation.
To turn the backlight on, press and hold the HOLD
To turn the backlight off, press and hold the HOLD
AC/DC Voltage Measurements
WARNING:
Observe all safety precautions
when working on live voltages.
1. Set the rotary function switch
to the
HZ% position.
2. Press the MODE button to select
AC or DC voltage. The AC "~" or
DC "
" symbol will appear on
the LCD display.
3. Insert the black test lead into
the COM input jack and the red
test lead into the V input jack.
4. Touch the test lead probes to the circuit under test.
If measuring DC voltage, touch the red test lead to the
positive side of the circuit and the black test lead to the
negative side of the circuit.
5. Read the voltage on the LCD display.
button.
button until the backlight turns on.
button until the backlight turns off.
LoZ mV AnF M k
AC+DC
0
10
20
30
40
50
60
AUTO HOLD REL PEAK MAX MIN AVG
LoZ mV AnF M k
AC+DC
0
10
20
30
AUTO HOLD REL PEAK MAX MIN AVG
V
+
9
Operation cont.
Frequency and % Duty Cycle Measurements
WARNING:
when working on live voltages. Do not measure
frequency or % duty cycle on circuits that exceed 600V.
1. Set the rotary function switch to
the V
HZ % position.
2. To select Frequency or % Duty
Cycle, press the MODE button
until the "Hz" or "%"symbol
appears on the LCD display.
3. Insert the black test lead into
40
50
60
the COM input jack and the red
test lead into the V input jack.
4. Touch the test lead probes to the circuit under test.
5. Read the frequency or % duty cycle on the LCD display.
-
LoZ mV AnF M k
AC+DC
Observe all safety precautions
0
10
20
30
40
50
60
AUTO HOLD REL PEAK MAX MIN AVG
10
LoZ mV AnF M k
AC+DC
0
10
20
30
40
50
60
AUTO HOLD REL PEAK MAX MIN AVG
Hz
Publicidad
Tabla de contenido
