Kohler K-11410 Guia De Instalacion página 5

3. Install the Anchor(s)
NOTE: You may need to disassemble some of the accessories. Some
accessories will be packed with the wall plate installed in the post.
Loosen the setscrew and remove the wall plate if needed.
Press and hold the legs of a wall anchor together, then insert the
wall anchor legs into the hole. Insert all wall anchors into the
pre-drilled mounting holes.
Carefully tap each wall anchor into the finished surface. Ensure
the wall anchors are flush with the finished surface.
NOTE: If the wall anchor was inserted into a space between the
studs, it will be necessary to spread the wall anchor legs. Insert a
thin, long object (such as a finishing nail) into the wall anchor hole
to spread the anchor legs. Repeat for all wall anchors inserted
between studs.
Kohler Co.
Install the Anchors
Nail
5 1044367-2-B