Parts; Start Up - Truper ROTI-20N Manual Del Usuario

The wireless hammer drill is useful to both boring orifices with
the impact mode as well as screwing and unscrewing.
Battery Level
Indicator
Battery
charger
Battery charge
1. Plug in the charger in a 120 V~power outlet (Green
charging indicator light will turn on).
2. Insert the battery into the charger sliding it as shown in
the figure. The green light will turn off and the red light
should turn on indicating the charge has initiated.
• When the battery is completely charged, the green light
will be on and the red light will be off.
• Disconnect the charger from the power once the charge
is completed.
• If the red light is blinking it signals a defective battery.
Replace with a new one.
• In case the green light is blinking it signal the
temperature in the battery is lower to 32 °F or higher than
113 °F. Wait until the battery temperature is in the
adequate level to be able to charge it.
6
ENGLISH
Keyless
chuck
Double
Lithium Ion
Battery (2)
Charge
Battery
indicator
connection
teeth

Parts

Torque Impact-Rotation
regulator Selector collar
tip
Switch
LED
Battery
light
release
button
Lithium Ion
Battery (2)

Start Up

2
Speed
selector
Rotation direction
button and
switch lock
Handle
Belt clip
1