Publicidad
Idiomas disponibles
Idiomas disponibles
AUDIO SETTINGS
VOLUME OFFSET
–15 to +6 (0): Preset the initial volume level of each source.
(Before adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Not applicable for HD RADIO/TUNER source, AUX source and
(Sound
SIRIUS XM source.)
reconstruction)
ON: Creates realistic sound by compensating the high-
frequency components and restoring the rise-time of
the waveform that are lost in audio data compression. ;
OFF: Cancels.
SPACE ENHANCE
(Not applicable for HD RADIO/TUNER source.)
SMALL/ MEDIUM/ LARGE: Virtually enhances the sound
space. ; OFF: Cancels.
SND REALIZER
LEVEL1/ LEVEL2/ LEVEL3: Virtually makes the sound more
realistic. ; OFF: Cancels.
STAGE EQ
LOW/ MIDDLE/ HIGH: Virtually adjust the sound position
heard from the speakers. ; OFF: Cancels.
DRIVE EQ
ON: Boosts the frequency to reduce the noise heard from
outside the car or running noise of the tyres. ; OFF: Cancels.
SPEAKER SIZE
FRONT
SIZE
3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/
5×7/ 6×8/ 6×9/ 7×10: Selects according to the
connected speaker size for optimum performance.
TWEETER SMALL/ MIDDLE/ LARGE: Selects according
to the size range of the connected tweeter for
optimum performance. ; NONE: Not connected.
REAR
3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/ 6×8/
6×9/ 7×10: Selects according to the connected speaker size
for optimum performance. ; NONE: Not connected.
SUBWOOFER
6.5"/ 8"/ 10"/ 12"/ 15" OVER: Selects according to the
connected speaker size for optimum performance. ;
NONE: Not connected.
X ' OVER
TWEETER
FRQ
1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/ 10KHZ/
12.5KHZ: Adjusts the crossover frequency for the tweeter speaker.
GAIN LEFT
–8 to 0: Adjusts the output volume of the left tweeter.
GAIN RIGHT
–8 to 0: Adjusts the output volume of the right tweeter.
FRONT HPF
F - HPF FRQ
30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/
150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency
for the selected speakers (high pass filter). ; THROUGH: All signals
are sent to the selected speakers.
F - HPF SLOPE –6DB/ –12DB/ –18DB/ –24DB: Adjusts the crossover slope.
(Selectable only if a setting other than [THROUGH] is selected for
[F - HPF FRQ].)
F - HPF GAIN
–8 to 0: Adjusts the output volume of the selected speaker.
REAR HPF
R - HPF FRQ
R - HPF SLOPE
(Refer FRONT HPF settings above.)
R - HPF GAIN
SUBWOOFER
SW LPF FRQ
30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/
LPF
150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency
for the subwoofer (low pass filter). ; THROUGH: All signals are sent
to the subwoofer.
SW LPF SLOPE –6DB/ –12DB/ –18DB/ –24DB: Adjusts the crossover slope.
(Selectable only if a setting other than [THROUGH] is selected for [SW
LPF FRQ].)
SW LPF PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
SW LPF GAIN
–8 to 0: Adjusts the output volume of the subwoofer.
• [SUB-W LEVEL]/ [SUBWOOFER] of [SPEAKER SIZE]/ [SUBWOOFER LPF] of [X ' OVER] is selectable
only if [SUBWOOFER SET] is set to [ON].
• [TWEETER], [REAR HPF] and [SUBWOOFER LPF] of [X ' OVER] is selectable only if a setting other
than [NONE] is selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE].
• Once you have selected the speaker size ([SPEAKER SIZE]), the frequency and slope settings are
automatically set for the crossover of the selected speaker.
23
ENGLISH
Publicidad
