Safe Vehicle Belt Systems - Graco SnugRIDE Click Connect 40 Manual

4.2.2 SAFE
THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR
CHILD RESTRAINT, IF the seat location meets all other requirements
of these instructions and those in your vehicle owner's manual. LATCH
can be used in place of the vehicle belt system in designated locations.
Please refer to vehicle owner's manual for LATCH locations.
When using child restraint without the base, adjust the belt as described
in this section for these types of vehicle seat belts.
When using the base to install the child restraint, you must ALWAYS use
the lock-off to secure the lap belt or lap/shoulder belt. See "6.2 Installing
the Child Restraint and Base Using Vehicle Belt", page 28
for installation instructions when using the base.
Some vehicle lap/shoulder seat belts have a plastic button on the belt.
Do not allow the button to interfere with the belt routing through the
vehicle belt path when installing the seat alone, or with the lock-off
when installing the seat and the base.
Lap Belts - Manually Adjusted
Belt tail
Vehicle Belt Systems
When buckled, the belt is
tightened manually by pulling on
the belt tail while pushing down
hard on the child restraint.
16