5.1 Adjusting Handle
1. Press handle adjustment buttons on both sides of handle
2. Rotate handle until it clicks into any of the
4 positions:
Position A: MUST be used
Position A,B,C,D: may be used in vehicle.
BOTH handle adjustment
buttons must pop out to lock
handle in place
3. Push and pull on the handle
to be sure it is locked firmly in
position.
5.2 Removing and Attaching Child Restraint
To remove, squeeze release handle at back of child
restraint and lift out of base as shown
To put child restraint in base, push child restraint
down until it clicks into base. Pull up on child
restraint to be sure it is latched firmly into base.
when carrying by handle,
.
Carrying
.
23
.
A
B
Sitting
C
D