Conditions Of Use - Festo DGCI Serie Manual De Instrucciones

DGCI−...
4

Conditions of use

Please note
Malfunctions will occur if the device is not used correctly.
S Ensure that the specifications in this chapter are always observed.
S Note the warnings and instructions on the product and in the relevant
operating instructions.
Compare the maximum values specified in these operating instructions with
S
your actual application (e.g. forces, torques, temperatures, masses).
The product can only be operated in compliance with the relevant safety re
gulations if the maximum loading limits are observed.
Take into consideration the ambient conditions at the location of use.
S
Corrosive elements in the environment (e.g. ozone) will reduce the service life
of the product.
Please comply with national and local safety laws and regulations.
S
Use the product in its original state. Unauthorised modification is not
S
permitted.
Remove all transport packing such as foils, caps, cardboard.
S
Exception:
the plug elements on the compressed air ports (danger of dirt entering the
tubing)
The packing is intended for recycling (except for: oiled paper = other waste).
Make sure there is a supply of correctly prepared compressed air (è Technical
S
Specifications).
Read also the documentation for your control system (e.g. SPC200).
S
28
Festo DGCI−... 0801a English