Selecting The Display Functions - MV Agusta BRUTALE 990R Manual Del Usuario

4.4.1. Selecting the display functions

The following settings may be changed
on the display:
• "RUN" (Odometer)
• "CHRONO" (Chronometer)
• "SERVICE" (Expiration of scheduled
maintenance service)
• "MAINTENANCE" (Tyre control) *
4
• "TC" (Traction control)
• "IMMOBILIZER" (Antitheft device)
To display the operating modes, press
"SET" for less than four seconds. When
pressed, the display shows all modes,
in a sequence. Select the desired
mode.
(*): This function is present only on certain models
OPERATION
WARNING
The operation must be performed while the engine is
running, the gears are in neutral, the motorcycle is
stationary, and with the feet on the ground. Do not set
the display functions while riding.
- 38 -
4